Fanvil PA2-Kit

Fanvil PA2-Kit Accessory Bundle Package Contents:

Note: Does not include PA2 Gateway.

  • Speaker module
  • Microphone module
  • Button module
  • IP camera module

 

Fanvil PA2-Kit (Speaker, Mic, Button, IP Camera Button)

Fanvil PA2-Kit - Fanvil Hong Kong - 香港代理

Get an official accessory kit for your Fanvil PA2 SIP Paging Gateway & Video Intercom. This kit includes four modules: a speaker, microphone, button, and IP camera. The 5W loudspeaker and -38dB±2 microphone are waterproof and dustproof, and both come with a self-adhesive layer for simple installation.

The stainless steel button is IP67 and IK10 rated with a mechanical lifetime of 200,000 clicks. It is backlit using an LED with a lifetime of 400,000 hours. The IP camera module gives you 720p HD video. It is powered through the PA2 gateway’s LAN port. The wide-angle lens with f/1.2 aperture provides color video down to 0.1 lux.

Fanvil PA2-Kit - Fanvil Hong Kong - 香港代理

The PA2 has various functions and interfaces such as intercom, broadcast, video, security, recording.

Fanvil PA2 SIP paging gateway Technical Specification

Intercom

  • Two SIP lines, supporting SIP 2.0 (RFC3261) and related RFC
  • Supports two lines RTSP
  • Voice broadcast IP address
  • Button or remote volume adjustment
  • Switch signal input and output
  • Talkback recording output
  • Handsfree talking
  • Default auto answer
  • Dynamic multicast function
  • Supports DC or POE power supply
  • Support for Function key interface
  • Support monophonic active speakers
  • Network time synchronization
  • Action URL / Active URI remote control
  • Supports SRTP
  • Support for HTTP / HTTPS web pages
  • Support Qos: 802.1p / q, DSCP
  • Support MD5 authentication
  • Supports Web Filter
  • DHCP / static / PPPoE
  • STUN

Physical Specifications

  • 2 RJ45 interface: Yellow: WAN port 10 / 100M adaptive, support POE PoE: 802.3af (Class 3: 6.49 ~ 12.95W) Black: LAN port (Only connected to the original camera) Cable: Super five lines or better
  • 1 blue indicator (SIP status and network status)
  • 2 volume plus or minus key
  • 1 restore factory settings key
  • 1 recording output interface: 3.5mm standard audio interface 15 Ohm impedance
  • 1 ground screw
  • 1 way passive speaker interface: Output power: 4Ω, POE / 10W, 12V / 10W,18V / 20W, 24V / 30W; related to supply voltage. Wire diameter: 18 AWG or larger diameter, Interface:Pluggable terminal block
  • 1 headset speaker: Output: 32 Ohm 1.2V interface:Pluggable terminal block
  • 1 DSS key interface (4 lines): Indicator: Output 5.0V 5mA Interface:pluggable terminal block
  • 1 way microphone input interface: Recommendation: Use an electret condenser microphone Sensitivity: -38dB, Impedance 2.2 K Ohm bias voltage 2.2V Interface:Pluggable terminal block
  • 1 short circuit input and output interface (built-in relay): Relay: MAX DC30V / 1A, AC125V / 0.5A, Interface:pluggable terminal block
  • 2 parallel power input interface: 12V-24V / 2A DC 1 road for the 5.5mm DC power seat 1 road way 2Pin pluggable terminal block
  • Standby power consumption: DC12V 1.32W / POE 1.78W
  • Housing material: aluminum alloy shell
  • Installation: Indoor installation
  • Operating temperature: -30 ~ 70 ℃
  • Storage temperature: -40 ~ 70 ℃
  • Relative humidity: 10% – 95%
  • Equipment size: 113x83x28mm
  • Packing size: 138x108x77mm
  • Equipment weight: 250g

Audio

  • Narrowband speech coding: G.711a / u, G.723.1, G.726-32K, G.729AB
  • Broadband speech coding: G.722
  • Half Duplex Echo Cancellation (AEC)
  • DTMF: In-band, out-of-band DTMF (RFC2833) / SIP Info

Networking Protocols

  • Supports PoE (802.3af
  • Primary and secondary DNS servers are supported
  • Support VLAN
  • Supports SNTP client
  • Support VPN L2TP / PPTP / IPSec